Home theater receivers by Marantz.

Questions au sujet de 23 Voir tout

Why won't my amp turn on?

I have a Marantz model 1040 amplifier that wont turn on. I checked all of the fuses, they are good, and when the amp is plugged in, I can get power through one of the outlets that is on the back of the amp. Still doesn't turn on. Not sure where to start.

Une réponse ! View the answer J'ai le même problème

Cette question est-elle utile ?

Score 1
Ajouter un commentaire

%Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

Parcourez notre boutique

2 réponses

Solution retenue

kalewenczel I'd start by looking at the power supply for the amp. You will have to disassemble it. Take plenty of pictures and post those with your question. Use this guide for that. It will allow us to see what you see. Check the large capacitors and diodes on the power board. Attached image shows the location of the parts

Block Image

and here is the schematic for it

Block Image

You do not just want to check the fuses for continuity but check to see if you have power on them as well. Let us know what you find.

Cette réponse est utile ?

Score 4
Ajouter un commentaire

Check the power switch on the receiver. Make sure is is getting power to it and not broken inside. This units are notorious for this.

Cette réponse est utile ?

Score 0
Ajouter un commentaire

Ajoutez une réponse

kalewenczel sera éternellement reconnaissant.
Voir les statistiques:

Dernières 24 heures : 2

7 derniers jours : 18

30 derniers jours : 92

Total : 2,865