Réparez vos affaires Communauté Boutique

Options

make this into usb

So i just bought an logitech Driving force Shifter, and want to make a standalone version, cause i dont have the wheel for it, and i figured they use SUBD9 Connector, well only one, and i hoped to get some help from anyone, that could help me make this happen to become a usb connector?

i have an arduino i could use to convert the SUBD to the usb through arduino

i watched this guy here but still yet i didnt get much out of it..

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
4 commentaires

I doubt you could do that.

par

well @pccheese haha lets hope i eventually will come up with something :) :P

par

Good luck! You'll need it. Not only will you have to adapt the connector, but you will have change the firmware to accept this new interface.

par

Ajouter un commentaire

2 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Réponse la plus utile

Options

You are correct. Logitech says that the shifter connector is a DB-9 Male.

So maybe this will work?

https://www.ebay.com/itm/8-Inch-0-25m-RS...

Cette réponse est-elle utile ?

Oui Non
Indice 2
Ajouter un commentaire

Options

Nothing but a new usb controller will work , the shifter is only a axis with the mechanism, nothing else , no board, no chips, you need a Arduino to map the axis coordinates into buttons in order to work

Cette réponse est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

Ajouter une réponse

Petter Berget sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 5

Total : 3,280