Aller au contenu principal

Sorti le 25 septembre 2015. Modèle A1688/A1633. La réparation de ce modèle est similaire à celle des versions précédentes et nécessite tournevis et outils pour faire levier. Disponible en GSM et CDMA / 16, 64 ou 128 Go / Argent, Or, Gris sidéral ou Or rosé.

2683 questions Voir tout

Touch ID not working with screen replacement but original home button

Hi all.

I can't seem to find any answers to this and it has me stumped.

I have replaced a display on a iPhone 6s but have carefully transferred the original home button to the new assembly but the touch ID will not work.

I have also removed the original lcd backplate from the broken screen and connected the home button to that and then that to the board with the same result.

Can anyone help me?

Thanks

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 1
Ajouter un commentaire

1 Réponse

i think you have damaged the FTP ribbon. i have seen this so many times. the ribbon has perforations at the top of the flex on the lcd part. check the perforations for breaks where it leaves the back of the lcd metal shield. good part is you can fit a replacement ribbon just not the actual button

Cette réponse est-elle utile ?

Indice 0

1 commentaire:

Thanks for your reply. I don't think that is the case though. I was so careful when performing the replacement, and like I said in my original post, I even swapped it for the original with the same result

par

Ajouter un commentaire

Ajouter une réponse

domhaywood sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 121