Rep: 11
1
I have the items to open my iPod Touch 5th gen, I have a new charge port to replace the old one with, is it safe to use a hair dryer to open the ipod with? And Will I need any glue or anything to put it back together?
Cette question est-elle utile ?
Rep: 128
4
1
You might need more adhesive to put it back together and yes a hair dryer should be fine. Hope this helps.
Cette réponse est-elle utile ?
Which one of these would be the best? Cause I don't want to buy something and it's not what I need...https://www.amazon.com/s/ref=nb_sb_noss?...
Actually, since you are repairing an ipod, most people use this and is similar to what is used on apple products. https://www.amazon.com/NIUTOP-Ship-Stick...
Okay so that's what I would need then to put it back together?
Rep: 175
3
Yes But Don't Heat One Spot Too Much Or You Have A Chance Of Melting The Insides Other Then That It Should Work.
Cette réponse est-elle utile ?
Rep: 1,8k
4
8
2
I would definitely have a professional look at repairing the charging port on this model. Saying this is a difficult task is an understatement even for professional micro solderers. The charging port is soldered with high melt alloy to the board itself. Basically this is a $@$* repair usually not worth doing.
Cette réponse est-elle utile ?
I would send it to someone, but I have no clue on who to send it to for repair.
Dernières 24 heures : 0
7 derniers jours : 1
30 derniers jours : 1
Total : 85
