Réparez vos affaires Communauté Boutique

The third iteration of the 10.1 inch Galaxy Tab tablet.

126 questions Voir tout

Options

Display cable connector damaged(on the displayboard)

Hi,

got a salvaged Tab 3 with a damaged board connector on the display logic board.

see photos.

has anybody some experience with repairing this. unfortunately i have just some basic soldering skills and not really used a rework station before.

Block Image

Block Image

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Réponse la plus utile

Options

@shrubbery if you have not had a chance to practice some microsoldering, I suggest that you do not try to replace it. It's a bit of a PITA to solder and will require the right tools and experience to be successfully repaired. I'd send it off to someone that specialized in board repair. This will of course depend on where you are located. @refectio and others on this forum have specialized in this type of repair. Contact them and see what they think.

Cette réponse est-elle utile ?

Oui Non
Indice 2

2 commentaires:

thanks for you input, hade same concerns about the repair

par

I agree with @oldturkey03, this is not a "let's try this" type of repair. Depending on the model, sometimes sourcing the right connector is very difficult. The connector melts really easily so these are not trivial to replace if you don't have any experience.

par

Ajouter un commentaire

Ajouter une réponse

Shrubbery sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 68