Aller au contenu principal

Complete repair manual for the PSP Go, including battery upgrade and display repair instructions.

Questions au sujet de 85 Voir tout

After reassembling my PSP Go the Start & Select buttons won't work

After i disassembled and rereassembled my PSP Go to fix my power switch; i used the PSP Go Teardown guide from this website, and now both the Start & Select buttons won't work anymore; and they were working before then.

so i tried taking my psp go apart and putting it back together again while going over the teardown guide thinking i over looked something, anyone have an idea of what that might be?

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 3

Commentaires:

This is how you replace it. https://imgur.com/gallery/JRRsJku

par

Ajouter un commentaire

3 solutions

Solution retenue

Look at the 2nd picture of step 9 in the PSP Go teardown. There is a cable that connects the buttons to the main board, it could be loose.

Cette réponse est-elle utile ?

Indice 3

Commentaires:

Here's a direct link to the page Aram is mentioning. PSP Go Teardown

par

thanks man, that's exactly what the issue was, i didn't see that cable cause it was hidden by joystick's ribbon cable.

par

Ajouter un commentaire

I have the same issue, except my cable is in. Any ideas? I just had sound issue which was caused by bad fuse, which i replaced and now works but SELECT/START button doesn't

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

It comes out from the front. First detach from the motherboard and then take it out from the front. The Start/Select buttons are sticked on.

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

joel c sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 4

30 derniers jours : 14

Total : 5,888