Aller au contenu principal

IBM Netvista faceplate won't come off.

So, I am working on an IBM Netvista M tower. I have determined that the vertical HDD has lost its will to live, and needs to be removed. Unfortunately, all of the plastic bits in the case have become so brittle that they either break with minimal torque or have lost elasticity. As far as I can tell, the front plate is released when you press on a purple tab in the back. This is not workings, and the HDD needs the front plate removed to pull out the drive.

Almost all of this information is just what I managed to dig up, and maybe incorrect. I am looking for solutions to get the hard drive out with little to no damage to the system. (It isn't mine, or I would have pried the plate off and replaced it with something else.)

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

1 Réponse

Solution retenue

Hi,

Here is a link to the service manual for your desktop (I think - not sure though).

Scroll to the bottom of p.44 to view the necessary pre-requisites and then the procedure to remove the HDD.

http://ps-2.kev009.com/pccbbs/netvista_p...

Hopefully this is of some help.

Cette réponse est-elle utile ?

Indice 5
Ajouter un commentaire

Ajouter une réponse

gatewaynomad sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 123