RÉSOLU : Which kind of digitizer connector on the LCD/Digitizer set - iPad Air 2

Which kind of digitizer connector on the LCD/Digitizer set

I have an unusal fix to perform actually.

It's on an Ipad Air 2, but in fact it's not located on the mainboard but... on an LCD/Digitizer set. The set is in good condition but on the digitizer ribon the two connectors (one 42 pin & one 34 pin) need to be replaced as some pin are spoiled.

I can change them but the only issue is that I can't find these connectors to buy.

Can somebody tell me if it is possible to find them somewhere?

They look like this : http://www.mobilemates.com/M-SPiP5-1053_...

Thanks

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non

Indice 0

Publié: 12 mai 2017

Options

This is gonna be pretty difficult to find. Your best bet, is to find another repair shop, that has one with a broken LCD. Then you could source the parts you need. Pretty uncommon for folks to repair the connector socket cables

Cette réponse est-elle utile ?

Oui Non

Indice 4

4 commentaires:

The OP would have to spend some time on sites like Digikey and look for one that has the same physical specifications. Hirose is another common manufacturer used for these types of connections.

12 mai 2017 par Minho

Thanks a lot Minho for this usefull info. I just bookmarked the site :)

12 mai 2017 par Patrice

iMedic : yes pretty uncommon I agree. But admit that when it is located on a set that usualy cost 120/130 $ pce this solution is not an option.

12 mai 2017 par Patrice

This is why I raid the graveyard

12 mai 2017 par iMedic

Ajouter un commentaire

iPad Air 2

Which kind of digitizer connector on the LCD/Digitizer set

1 Réponse

Ajouter une réponse