Réparez vos affaires Communauté Boutique

iPhone 4 pouces commercialisé depuis mars 2016 avec une configuration de matériel similaire à l'iPhone 6s. Disponible en Argent, Gris sidéral, Or ou Or Rose, avec 16 ou 64 Gb de stockage. Modèles A1662 et A1723.

1049 questions Voir tout

Options

Screen not firing up

Phone came into the shop yesterday and this could be bad

Unit seems to have no power and will not turn on

1. Tested Battery over half charged

2. Plug in charge cable Phone gets slightly warm after about 10mins charge

(normal and charging)

3. Changed Screen no change

4. Plugged into itunes itunes sees phone

5. Put on another screen (both new) no change

6. Checked main board no damage to connectors

Starting to get worried for this phone, anyone have any ideas ??

Cheers

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

2 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

have you tried power cycling the phone? pop the battery and press the power button then plug back in.

if that doesn't work you could have blown the backlight chip by changing screen without disconnecting the battery first.

rip the backlight off a working screen and shine a torch behind the lcd to confirm

Cette réponse est-elle utile ?

Oui Non
Indice 1

3 commentaires:

Thanks for the quick answer, I new as soon as I posted this I should have mention rule 101. Isolate power source. Sorry.

Yes I did isolate the power source and i have disconnected the battery and retried to start the phone to no avail

par

no problem, next step is to tear the black backlight off the back of the screen you won't damage anything so don't be scared then you will be left with the lcd with you can shine a torch thru and see if the lcd is working

par

Ripped a good screen off one and no back light. Looking more like the Backlight circuit problem

par

Ajouter un commentaire
Réponse la plus utile

Options

If iTunes recognizes your device and multiple screens don't work, then check the LCD with a flash light. If you see a dim image, then it sounds to me like you have a blown backlight circuit on the logic board. It's usually the filter but it can also be the rest of the circuit.

It's either the screen or the backlight circuit on the logic board. If you have access to a known-good screen, try that first. Otherwise, you will need to find a reputable shop that does micro-soldering.

Cette réponse est-elle utile ?

Oui Non
Indice 5

2 commentaires:

Thank you for your time, great help. That is why I like this forum. Working alone in a shop you don't always have the answers and it is great to "put it out there" To this great pool of knowledge

Thank you again

par

My pleasure!

if this answer solved your problem, please “Choose as Solution”. This allows people in the future to understand which answers helped solve the problem and adds value to the site. - Thanks

par

Ajouter un commentaire

Ajouter une réponse

charlieclemett sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 72