Aller au contenu principal

Model A1001 or A1025 / 667, 800, 867, or 1.0 GHz G4 processor

50 questions Voir tout
Question close

PowerBook G4 Titanium DVI Eject Problems

Hey, as you know I got the PowerBook working. But the is a problem. when I inserted a disc (trying to install new software) and tried to eject it, it just loaded up again( I pressed the eject button and it disappeared and then booted back up. Any ideas to get it out? Reply back.

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

4 Réponses

Solution retenue

Another way is to type "drutil eject" (without the quotes) in terminal.

Cette réponse est-elle utile ?

Indice 1
Ajouter un commentaire
Réponse la plus utile

From the way you describe it "loading up again", it sounds like the CD is finding resistance as it ejects, and so it goes back into the drive. This is very common. If this is the case, I'd remove the bottom casing of your machines (very easy -- just remove the screws and pull the bottom off) and from there you can manipulate the elements which would be blocking the optical drive.

Cette réponse est-elle utile ?

Indice 2
Ajouter un commentaire

Try booting up the laptop while holding down the trackpad button.

Cette réponse est-elle utile ?

Indice 1
Ajouter un commentaire

The easiest way to eject any disk from a Powerbook is too hold down the mouse button when starting the computer. This has been in the OS since Mac OS 8.5. I have used this several and have told others with success every time.

Walter

Cette réponse est-elle utile ?

Indice 1
Ajouter un commentaire
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 963