Aller au contenu principal

Repair guides and support for LED, LCD, HD and other Vizio TVs.

930 questions Voir tout

No picture just logo frozen on screen

My Vizio smart tv does not bring picture screen to work.. tv is stuck on vizio logo .. help!!

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 13
11 commentaires

tv is powering up but stuck on home screen

par

Can't get the tv to open just lines going threw it the guide down show up

par

Can't see screen

par

look under your tv and between HDMI AND USB buttons is a tiny hole,get a toothpick or something and off tv push in the hole ,hold it down,on tv and keep in pushed in until tv logo comes on ,keep holding for about 60 seconds on tv should reboot,keep trying,it will reset

par

Nope. No button on my e550i-ao

par

Voir 6 commentaires en plus

Ajouter un commentaire

3 Réponses

Solution retenue

@ritz1234, Maritza, You did not state your model# so I will give a some what generic answer common to Vizio television with this issue. Try a reset, unplug the TV, then press and hold the power button ((on the TV set)) for 30 seconds, then release it. Then wait 10 minutes and plug the set back in, press and hold the power button again on the set until it turns on.

No go, probable memory on the board has failed. EEPROM memory may have to be replaced or the main board. Links below may have some more helpful info. on your TV's problem. Good luck. I hope this helped you out, if so let me know by pressing the helpful button.

https://www.youtube.com/watch?v=9Pz_gi_z...

https://www.badcaps.net/forum/showthread...

Cette réponse est-elle utile ?

Indice 8

8 commentaires:

Model # is M3D470KDE

par

Maritza Villanueva, Did not find any additional info. on your Vizio Model # M3D470KDE. Try reset and suggestions above. If not comfortable with electronics repair/diagnosing have a good local TV repair shop have a look and estimate repair. Good luck.

par

my model is a westhinhouse smart tv and the logo stays on after pressing power...

The serial # is W170580S07568 august 2017

What can i do to fix it?

par

My Smart TV had the iogo flashed on and off. I tried the rest option, but didn't work so I took out my USB flash drive and it works fine.

par

That worked. Thank you very much.

par

Voir 3 commentaires en plus

Ajouter un commentaire

Unplug the vt. Push the power button semi rapidly as you can’t really tell if you’re pushing it correctly. Do this for 30 seconds. Repeat process if needed.

Same problem, and this just worked for me.

Cette réponse est-elle utile ?

Indice 3

4 commentaires:

I have try that a lots I will do that again

par

!&&*’s yeah that worked like a charm great advice anybody reading these comments if you have a TV that is on the Visio boot up screen this worked thank you you’re the man!!!!!

par

My New vsion smart tv stuck in logo what should i do

par

None of these work I have a d24h j09

par

Ajouter un commentaire

I cannot find a reset button for my vizio?

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

Maritza Villanueva sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 7

7 derniers jours : 105

30 derniers jours : 533

Total : 163,137