Aller au contenu principal

A Samsung Series 3 PC, the NP300E5C-A09US is a 15'' laptop with a 1366x768 screen resolution. It is a great choice for anyone looking for a lightweight, yet powerful portable computer.

18 questions Voir tout

How can I fix my laptop logo/boot loop?

When I start up my laptop the samsung logo comes up and after a few seconds goes to a black screen and a few seconds later it goes back to the logo and it keeps repeating this forever. I have tried many of the common BIOS keys and none of them brought up anything.

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 2
2 commentaires

Have you tried to use a usb with a bootable window?

par

Hi!

I have the same problem, and with some googling, it came out that the NVRAM (which is located in the bios) is corrupted. (In my case, it corrupted when I installed linux, as documented on many forums.) Unfortunately, the only fix is to buy a new bios chip and replace it.

par

Ajouter un commentaire

2 Réponses

Solution retenue

Take out battery:

Samsung NP300E5C Battery Replacement

Try resetting BIOS:

https://www.youtube.com/watch?v=UXDZXDif...

I would ignore the desoldering part and just remove the CMOS “coin” battery, to the right ,top of video before where he does the desoldering.

This will help with disassembly - clearer than video:

Samsung NP300E5C-A09US Motherboard Replacement

Image Samsung NP300E5C-A09US Battery

Tutoriel

Samsung NP300E5C Battery Replacement

Difficulté :

Très facile

1 minute

Image Samsung NP300E5C-A09US Motherboard

Tutoriel

Samsung NP300E5C-A09US Motherboard Replacement

Difficulté :

Modérée

20 minutes - 1 hour

Cette réponse est-elle utile ?

Indice 1
Ajouter un commentaire

Hi @gcb140

My bet is your Hard Drive is having problems. You can try to reinstall windows using a recovery disk but if it continues to fail, you may need to replace the Hard Drive.

Cette réponse est-elle utile ?

Indice 0

2 commentaires:

I am having the same problem but after I replaced the hard drive and RAM. Boot loop, won't even POST, can't get into BIOS. Won't boot from DVD drive or Hiren's through USB.

par

After you've replaced the Hard Drive, you will need to reinstall an Operating System for the computer to recognize the Hard Drive as a boot device. Follow these instructions to start the process:

https://community.spiceworks.com/how_to/...

You will need a bootable flash drive with your Operating System installer on it to reinstall successfully.

par

Ajouter un commentaire

Ajouter une réponse

Grant B sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 4

30 derniers jours : 35

Total : 3,142