Aller au contenu principal

Sorti le 25 septembre 2015. Modèle A1688/A1633. La réparation de ce modèle est similaire à celle des versions précédentes et nécessite tournevis et outils pour faire levier. Disponible en GSM et CDMA / 16, 64 ou 128 Go / Argent, Or, Gris sidéral ou Or rosé.

2688 questions Voir tout

Phone does not turn on at all - Tried new battery and screen - U2 Chip

Hi All

Have an iPhone 6S that will not turn on at all.

Tried putting a charged battery in and a new screen still will not turn on at all.

Could it be the U2 chip? I thought even though it was faulty it would still turn on with a charged battery.

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

1 Réponse

Solution retenue

Even a defective Tristar should get to the Logo screen...usually.

Is you phone detected by iTunes if connected to a computer?

Your problem sounds more pervasive. Have you probed the circuit board, primarily PP_VCC_MAIN & PP_BATT_VCC to see if they are shorted? When "powered" by a known-good battery, do you see the proper voltage levels? This is the first thing to check, after the battery, on dead devices.

If you see shorts or no voltages, then this phone will have to be looked at by an experienced micro-solderer.

Cette réponse est-elle utile ?

Indice 3

2 commentaires:

Not detected by computer, have not probed the circuit board.

Are you saying to test those points with my multimeter?

Do I need to ground against a certain point on the board or just the chassis?

par

You need to find a ground point, chassis or otherwise. You should search for and download the schematic in order to do this properly.

par

Ajouter un commentaire

Ajouter une réponse

Brick50 sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 83