Aller au contenu principal

Le Mavic Pro est un drone compact et pliable avec des capacités vidéo 4K. Il a été lancé en novembre 2016. Le numéro de modèle est M1P et sa manette porte le numéro de modèle GL200A.

41 questions Voir tout

camera has water inside

hi there,

i was flying sideways and drowned my mavic pro in a tree which fall then in a river (sweet water). Found it again 24 hours later in about 4 meters under water -

everything works fine but it got water inside the camera which is now stuck on the glass in front of the lens and obviously can not disappear by itself. I opend the little screws but did not dare to go further as the parts did not want to get loose. I also see a golden ring near the lens cover which could hold it in place...?

any help?

Thanks anyway!

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 1
Ajouter un commentaire

1 Réponse

Réponse la plus utile

Do not charge it! Follow these guides to clean all the parts to help prevent water from corroding it. Do it ASAP!

Read this: Electronics Water Damage

Disassembly: DJI Mavic Pro Teardown

Proper cleaning demonstration: Réparer un dommage causé par un liquide sur un iPhone

As for the camera, there is no hope. You'll need to replace it. Use the teardown to replace it and any other non-functioning part. I recommend taking it low and easy the first few flights to make sure everything's working.

Hope this helps!

Image iPhone

Tutoriel

Réparer un dommage causé par un liquide sur un iPhone

Difficulté :

Difficile

1 - 2 hours

Image DJI Mavic Pro

Tutoriel

DJI Mavic Pro Teardown

Difficulté :

Modérée

Cette réponse est-elle utile ?

Indice 3

3 commentaires:

In that case that the camera can not be opened I try to remove the glass and find something to replace it (because the camera is working fine, it is only a waterdrop behind the glass which is in the view,..), if i kill it i have to excange it anyway...

Thank you!

par

actually maybe just exchange open the glas, release the moisture and put on a ND filterlens would solve the problem :)

par

Jeronimo I do not recommend that. You should replace it. 24Hr underwater also penetrated the sensor, which you can not fix. Have you cleaned the drone using the instructions above? This is something you should have done days ago. If you haven't done it yet, then the corrosion has probably already caused irreversible damage.

par

Ajouter un commentaire

Ajouter une réponse

jeronimo sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 1,658