Rep: 137
3
4
Hello!
I'm fixing today a ps4 by replace the hdmi port. At first time the soldering looks good but when I plug to TV it shows the messege "no signal". I already checked the soldering but it don't show any bypass. Know it won't turn on.
soldering
Cette question est-elle utile ?
Rep: 34,8k
18
60
39
The pic only shows some of the pins...pin 19 is not in the photo and the pins on the right side of the photo are fuzzy. Pin 8 looks like it doesn't have the correct circuit trace connected to it...but I can't tell for sure from the pic. From what I can see it looks like the solder pad on the #1 pin is missing. It also looks like some of the other pins don't have enough solder on them...they may be loose. I'm guessing that there are some problems with one or more of the other pins as well. If you can get a clear pic of all of the pins...especially the ones on the far right I can have a look at those as well.
Hope this helps.
Cette réponse est-elle utile ?
Dernières 24 heures : 0
7 derniers jours : 1
30 derniers jours : 3
Total : 2,702
