Aller au contenu principal

The Samsung NaviBot SR8855 is a handy autonomous vacuum by Samsung.

21 questions Voir tout

Why does my navibot dont switch on?the battery is charged, but no ligh

My navibot Doesn't switch on. The Battery is charged but all lights are off. I tried to Clean it but Nothing changes.

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 3
Ajouter un commentaire

3 Réponses

Réponse la plus utile

@doxdici you will have to disassemble it and take a look at all connectors and check the battery to ensure it is working. A dead battery may appear to be charged but does not hold a charge. Start off with this teardown Samsung NaviBot SR8855 and take some pictures of what you encounter. Post those with your question so that we can see what you see. Use this guide Ajout d'images à une question existante for that.

Use this diagram

Block Image

to follow the power flow and see if there are any obvious damaged components etc..

Cette réponse est-elle utile ?

Indice 1

1 commentaire:

Where did you get this schematic?

par

Ajouter un commentaire

Your battery is not recognized by device it doesnt turn it self. You need to check battery 14.4-15.5 volt between

Cette réponse est-elle utile ?

Indice 0

2 commentaires:

Same probleme here, battery ok but navibot death, no lights, notting....! Switch is ok, voltage on the cirquit bord ok.

par

Are you sure with battery voltage? My battery shows 13.3 V and It`s new...

par

Ajouter un commentaire

90% switch on/off, it was very dirty contacts inside, you should change switch

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

Doxdici sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 6

30 derniers jours : 24

Total : 3,213