Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

No volume control- headphones or dock

I can't control the volume output of my 1st gen Touch on firmware 3.3.1.

When I plug headphones in the volume slider doesn't appear, reading around I see this was a pretty common issue when people updated to 3.x so I ran a jailbreak and installed SBSettings and the volume slider widget - it doesn't control the volume, still stays at a constant level.

I plugged into the dock and have the same issue - no control over volume from the iPod.

So although I was initially thinking a headphone jack might need replaced I'm not so sure now that when docked it still has the same issue!

Any ideas?

Répondu ! View the answer J'ai le même problème

Cette question est-elle utile ?

Score 0

Commentaires:

Just realised you can't control the volume in a dock with the volume slider on any iPod - maybe it is tahat jack needing replaced!

par

Ajouter un commentaire

Kits pour Nintendo Switch

Une solution rapide pour reprendre le jeu

Acheter un kit pour Switch

Kits pour Nintendo Switch

Une solution rapide pour reprendre le jeu

Acheter un kit pour Switch

1 solution

Solution retenue

I would definitely start with the headphone jack. It is solder on the logic board and is available here http://www.parts4ipods.com/epages/es1157... and here http://www.ipadpartsshop.com/product_inf... and the instructions for the logic board are here iPod Touch 1st Generation Logic Board Replacement Good Luck to you and let us know what worked. :-)

Cette réponse a-t-elle été utile ?

Score 1

Commentaires:

Replacing the jack indeed did work - I just removed the ribbon and soldered small jumper cables.

par

Congratulations, good job and inventive :-) Thanks for accepting my answer.

par

Ajouter un commentaire

Ajouter une réponse

Neil sera éternellement reconnaissant.
Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 3,730