Aller au contenu principal

The Brother MFC-3240C is a 5-in-1 color inkjet printer.

10 questions Voir tout

Random error code problems?

When I first got my printer off of Craigslist it read Unable to Clean. I cleared that up by resetting purge to all zeroes and cleaning out the ink absorber box. While I was setting all other settings to all zeroes. I think I should have stopped at zeroing just purge. Since then I've had error 50,error 46,36,Unable to Init., and now somehow it now reading Unable to print. I think (remember I said THINK) if I could reset all the default factory settings it would start working corectly. I'd be eternally grateful if someone could help me resolve this problem. I'm trying to fix this printer for an older woman in my building !

Thanks, Ronnie

P.S. There are no paper fragments or foreign objects in this prinetr !

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice -1
Ajouter un commentaire

2 Réponses

Réponse la plus utile

Press Menu,*,2,8,6,4 (must be done inside two seconds). It should say

maintenance in the display after a short delay.

press 01 (to reset the EEPROM data), then 99 (to exit maintenance mode).

This will reset the EEPROM data

Brother Maintenance Mode Code

Cette réponse est-elle utile ?

Indice 2

1 commentaire:

I have the same problem with the error. It happened after a few ink refills. It seemed the ink was running out in the printer. I am gonna try this fix and see if it works for me

par

Ajouter un commentaire

It usually happens because of poor contact between cartridge and holders ans usually happens because of extra ink spilled over. So all you need to do is to clean out the head contacts by using some alcohol swabs or c2c solution.

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

Ronald Massey sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 2,084