Aller au contenu principal

Tutoriels de réparation et d'entretien pour les nettoyeurs de tapis verticaux, à vapeur et à eau chaude.

56 questions Voir tout

I need a special tool to get my shark vacuum apart

The fasteners look like an allen head with a pin in the middle. Looks like you would need an allen wrench with a tiny hole drilled in the middle of it. Any ideas what/where I could get a tool like this?

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 2
10 commentaires

Thanks for your help!

par

I see what kind of screws they are all I want to know is why!!!!!

par

How in the world would anyone be able to tell you *why* a company used a given type of fastener? Seriously now...

par

The only reason why companies do that is to prevent the "normal Joe" from opening (and fixing) their devices. Companies have done this for years. It absolutely impedes the Right to Repair and that nonsense has got to be stopped!

par

They don't want you to be able to work on them. So in frustration you'll go buy another one.

par

Voir 5 commentaires en plus

Ajouter un commentaire

4 Réponses

Solution retenue

@toolbag it sounds like you are talking about the tamper resistant Allen screws. It is a security feature that is easily circumventeed wit tool kits like like these. you can get those for Torx as well as many other screw heads.

Cette réponse est-elle utile ?

Indice 8

11 commentaires:

yes but how do you find out if u need metric or SAE

par

the product is a shark vacuum

par

torx screws are the type

par

@mcgarry there is no difference. The same Torx drivers are used to drive SAE and metric

par

Unfortunately, at least two of the security screws are in a deep and narrow hole that is impossible to reach with the short bits that are commonly sold.

par

Voir 6 commentaires en plus

Ajouter un commentaire

These are the right tools to open a shark vacuum cleaner. Yakamoz 11 Pcs Magnetic T6-T40 Torx Head Screw Driver Bit Set Security Tamper Proof Star 6 Point Screwdriver Drill Bits Tools with 1/4 Inch Hex Shank | 3 Inch Length https://www.amazon.com/dp/B078LXZPZ2/ref...

Cette réponse est-elle utile ?

Indice 2

2 commentaires:

Can I use any other tool

par

No, it must be this kind only. These tools are made by different manufacturers.

par

Ajouter un commentaire

I have got the screws out but the unit still seems to be sealed. I gave a new lower hose duct to replace the spilt one but now at a loss as to how to get to it.

Cette réponse est-elle utile ?

Indice 0

4 commentaires:

@lazyboy How did you reach the deep sockets? I have the correct bit, but it doesn’t reach.

par

Were you ever able to get into the unit to replace the hose, Ali?

par

There's screws under the two tiny wheels at the front. You need to pop those off to even see them. I love shark vacuums but as far as cleaning them they couldn't make it more difficult.

par

Curt, thank you so much for your answer. I have been looking for this tool and it's been very frustrating. You made it so easy. Including the link on where to get it it's so appreciated. Thank you so so much!!! Rae Lynn

par

Ajouter un commentaire

Any body know exactly what size tool to take apart? Have tried every size and can't get it apart!!

Cette réponse est-elle utile ?

Indice 0

1 commentaire:

it must be an issue other than size.

do your bits have a center hole?

are they Torx? Maybe they are Allen bits. THEY MUST BE Torx.

par

Ajouter un commentaire

Ajouter une réponse

Joe Kaplun sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 53

7 derniers jours : 314

30 derniers jours : 1,332

Total : 76,375