Réparez vos affaires Communauté Boutique

Modèle mi-2009 A1278 / Processeur Core 2 Duo 2.26 ou 2.53 GHz EMC 2326

745 questions Voir tout

Options

Unable to charge and to boot my MacBook after applying new thermal pas

Hello,

I disassembled my macbook to clean it for dust and apply new thermal paste.

Evertything was fine and I did it very carefully. But now I can't boot (I did it with the battery almost empty and the charge indicator works well and flash to indicate an empty battery) and the macbook didn't charge.

The indicator light on the magsafe charger doesn't glow...

Any idea how I should go with this?

I tried Shift+Crtl+Alt+Power Button to reset SMC. I don't know if ti's the good method but I didn't change anything...

Thanks in advance for your help

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

2 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s

Options

It sounds like you don't have the battery connected correctly. Are you able to power the laptop on with the power cable attached? The fact that the lights on the magsafe charger are showing nothing leads me to believe this is your problem.

Cette réponse est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

Options

Thanks for your help.

I have disconnected and reconnected the battery various times.

When disconnected the lights on the side of the MacBook which give us the actual charge of the battery don’t show anything.

When I reconnect it, the first light blink to indicate an empty battery.

So I don’t think it is the trick.

Thomas

Cette réponse est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

Ajouter une réponse

Thomas sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 42