Aller au contenu principal

The Sennheiser RS 120 is an RF wireless headphone system with open, supra-aural headphones.

52 questions Voir tout

How can you take the headphone apart, I need to get to the vol circuit

if i adjust the tuning or volume it is very erratic and sometimes only plays on one speaker. it looks like the potentiometer either needs cleaning or replacing but i do not know how to take it apart. please advise. is there an online service manual?

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

1 Réponse

To dismantle the headphones, twist off the foam ear pads and remove the screws that are visible underneath.

Good luck with repairing the volume control. I have had the same problem repeatedly. The potentiometers are of poor quality and soon wear out. If it’s the one for volume you can diagnose it from the noise and crackling when you turn it. If it’s the frequency control, the tuning zooms off to one end of the frequency range and you just get noise.

Replacements are difficult to find and don’t last long. Also you can easily damage the PCB when you unsolder them.

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

mike sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 2

Total : 89