Réparez vos affaires Communauté Boutique

4ème génération de l'Apple iPhone. La réparation est relativement simple, mais la vitre avant et le LCD doivent être remplacés ensemble. GSM / capacité de 8, 16 ou 32 Go / Modèle A1332 / noir et blanc.

2397 questions Voir tout
Question close

Options

Light sensor doesn't work, second cable (Original black screen)

Hi, I really need some help, I replaced the cable with the proximity sensor in order to fix the power button, then the microphone for videos and the proximity sensor didn't work. The second time, the proximity sensor still doesn't work!! This is really annoying, the cables seem to be high quality, I don't get it. I've tried restoring to 4.2.1, resetting all settings, hard resets. Any ideas??

It seems to be set well by the way, I've placed the black foam spacer over the sensors correctly I believe.

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

2 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Réponse la plus utile

Options

I had the same problem as you. I didn't have all the spacers in at first and that was my problem. Just make sure that the proximity sensor is sitting all the way down against the glass so that the sensor goes straight out the glass. My problem was that there was a tiny gap between the sensor and the glass and it was not shooting out straight. Hope it works out for you.

Cette réponse est-elle utile ?

Oui Non
Indice 1

1 commentaire:

Hey, yeah I've noticed on subsequent iPhone 4s that there is a little rubber spacer, I figured i can't matter that much so I ignored it (hearing about different sensor models and such). But maybe this is right. The problem is that I no longer have the original little spacer, I'll have to make something. I'll post on here if that works.

par

Ajouter un commentaire

Options

Hey, yeah I've noticed on subsequent iPhone 4s that there is a little rubber spacer, I figured i can't matter that much so I ignored it (hearing about different sensor models and such). But maybe this is right. The problem is that I no longer have the original little spacer, I'll have to make something. I'll post on here if that works.

Cette réponse est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 5

30 derniers jours : 8

Total : 1,729