Aller au contenu principal

External storage options by Seagate, usually connected by USB, available in many storage sizes and form factors.

46 questions Voir tout

How to open Seagate ST90000U2-external hdd case & remove drive

hello,

This seagate case uses 5-point screws (torx plus?), the problem is i do not know what size so as to find the appropriate driver.

any help/ideas much appreciated.

Mike

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 2
Ajouter un commentaire

3 Réponses

Solution retenue

You could measure the size of the 5star or you could be a set of the screwdrivrs.Size Inch point to point [in] Metric point to point [mm]

T1 .031 .81

T2 .036 .93

T10 .107 2.74

T15 .128 3.27

T20 .151 3.86

Looks like very limited availability :) http://www.traderscity.com/board/product...

and http://www.8starshop.com/en/12-in-1-comp... I am also sure that there are many more places that have a set of those. Good Luck to you.

Cette réponse est-elle utile ?

Indice 2
Ajouter un commentaire

I had a case like that; I believe I was able to remove the screws using a small flat screwdriver that was able to fit tightly enough into the screw head. Once I removed the screws, I replaced them with regular phillips head.

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

I can confirm that the screws for the casing of the Seagate ST90000U2 external HD are Pentalobe #6. You need a screwdriver PL-6 (Pentalobe #6) for these screws. I got a set of screwdrivers from a German company called Wiha, available on Amazon.

Block Image

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

grskarpat sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 5

30 derniers jours : 26

Total : 5,373