Réparez vos affaires Communauté Boutique

Sorti le 16 septembre 2016. Modèle 1660, 1778. Disponible en GSM ou CDMA / 32, 128 ou 256 Go / Or rosé, or, argent, noir et noir de jais.

2264 questions Voir tout

Options

iPhone 7 No front camera plastic holder/bracket/clip in replacement

Hi all,

I'm currently in the process of replacing the screen on my Iphone 7. Starting to reassemble the front camera and noticed that the replacement screen doesn't have the two plastic holders/brackets for the front camera and proximity sensor (see link) like my old screen does. Is this going to be a problem? Is it possible to transfer them over from the old screen (they seem to be stuck on there pretty tightly...)? If I have to purchase these how do I attach them, would an adhesive of some kind be necessary?

Thanks in advance

In case you don't know which parts I mean!

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 2
Ajouter un commentaire

2 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Réponse la plus utile

Options

You could try to reassemble the Front Camera flex without these brackets to see if everything lines up correctly (test the sensors). The risk is that as the phone gets jostled or dropped, the sensors and camera may move out of alignment.

You can order the brackets separately and stick them in place with a tiny drop of liquid adhesive. You need to make certain that the adhesive doesn't get on the window .

Cette réponse est-elle utile ?

Oui Non
Indice 1
Ajouter un commentaire

Options

Use an isesamo to carefully pry those off. Heat on the front side of the screen may be helpful.

Cette réponse est-elle utile ?

Oui Non
Indice 1
Ajouter un commentaire

Ajouter une réponse

Kyrra Rhyannon sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 413