Réparez vos affaires Communauté Boutique

Sorti le 19 septembre 2014, cet iPhone avec un écran de 4,7 pouces est une version plus petite de l'iPhone 6 Plus. Identifiables par les numéros de modèle A1549, A1586, et A1589.

4994 questions Voir tout

Options

Proximity sensor not working with any replacement

Hi, I have now had two iPhone 6’s that have had problems with the proximity sensor. Even if I put my finger on the screen it does not turn off the display.

I have tried to take the flex cable out of the screen housing and put my finger on top of the sensor. That also didn’t work.

Even swapping it out with other sensors have not yielded positive results.

Can this be due to a hardware failure on the logic board?

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

Did anything happen to your phone prior to this issue, such as a drop, other damage, repair attempt or contact with water?

Given the tests you have run to isolate the problem, you may very well have a logic board issue. I would just try a hard reset or even a full backup/restore first just to be certain.

If that doesn't work, then consider having your phone looked at by an experienced micro-solderer.

Cette réponse est-elle utile ?

Oui Non
Indice 2

1 commentaire:

No, there hasn’t been any damage prior to the issue, not that I can think of anyway. Tried the hard restore, but nothing has happened so far. I just hoped some others experienced the same issue and could verify that it’s a logic board issue.

par

Ajouter un commentaire

Ajouter une réponse

Carsten Panch Isaksen sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 176