Rep: 1
2
I have tore my phone down and am now trying to reassemble. I for the life of me cannot get the tiny screw back into the holes. If I put them on the end of the screwdriver they just fall off whenever I touch the phone. Any suggestions?
Cette question est-elle utile ?
Rep: 221,4k
15
289
807
You need to magnetize the screwdriver so that it holds the screws in place, with something like this. Or you can insert them in the holes with tweezers and then use the screwdriver to secure them.
Cette réponse est-elle utile ?
Rep: 13
1
Rep: 3,5k
6
7
2
Magnetic screwdriver, practice, and patients.... You will get it!!
Cette réponse est-elle utile ?
If your having the issues with even a magnetic driver use blu Tack to hold it on the head of the screw until you get a turn and purchase with the screw then remove the blutack and continue the rest of the tightening with the normal driver making sure there is no Blu tack Residue left behind! Slightly colder blue tack is ideal as it will just come away without any mess
Cette réponse est-elle utile ?
Dernières 24 heures : 1
7 derniers jours : 4
30 derniers jours : 14
Total : 1,480
1 commentaire
Normal with a screw designed by humans I would agree with both these ideas but these screws are 1.1mm. Twice now the screws have shot out the tweezers before I could get them to the phone. Luckily I found one of them. As far as the magnetized screwdriver it will stick to it but not on the end. It's always crooked and won't go in the screw hole. I'm 55 maybe my eyes and hands are too old for this.
par Joe Wasser