Réparez vos affaires Communauté Boutique

Version revisitée de l'iPhone 3G avec une vitesse de traitement plus élevée. La réparation de ce modèle est similaire à celle du 3G et nécessite de simples tournevis et outils pour faire levier. Modèle A1303 / capacité de 16 ou 32 Go / coque en plastique noir ou blanc.

1500 questions Voir tout

Options

two phones, one "no IMEI and ICCID" 2nd, no touch. Help?

I bought one water damaged iphone 3gs, and after replacing the battery and carefully cleaning the logic board, it boots up. But it won't activate because it can't find the SIM card. No IMEI number and no ICCID number. It is a 16 GB model.

The second one was dropped, so the digitizer was cracked. After replacing battery and digitizer, the phone boots up, but it won't react to touch. And I know that the digitizer is fine because it works on the water damaged phone.

Any ideas?

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice -1
2 commentaires

are these the phones you've already been asking questions about?

par

The water damaged one, yes. Not the second.

I decided to ask a new question because the problem now is somewhat different, since it boots.

par

Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

oops! silly woman that i am has put wrong answer... deleted it.

connector no 2 is the digitiser, check it is on properly, clean of dust and not damaged. give it a good clean. also try a hard reset...press and hold home and power button until apple appears then allow to reboot. connector 3 is for earpiece and proximity...sorry for confusion, I'm getting old.

Update

RE: the imei being possibly blocked.... you can do a quick search online.. the imei is printed on the sim tray (hopefully your tray is original to the phone) either for free which is often updated infrequently so is less accurate or pay a small amount to a site that gets updates daily/hourly which will be far more reliable. If you know the carrier then you could try contacting them directly. The serial number is printed on the metal shield of the motherboard if you are unable to get the imei and this may be more useful if you are contacting the carrier.

If this turns up ok then it may be the chip that is damaged.

Cette réponse est-elle utile ?

Oui Non
Indice 1

2 commentaires:

It's not dirt around the connector, doesn't look like there is something inside either. Pretty sure it is all the way in aswell.

par

The water damaged phone can't activate the sim card because it cant find it, itunes say. is it possible its locked? No progress on the touch though.

par

Ajouter un commentaire

Ajouter une réponse

henrik91 sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 2,490