Réparez vos affaires Communauté Boutique

Guides pour la version Wi-Fi de l'iPad Mini 3 (A1599). Annoncé le 16 octobre 2014, l'iPad Mini 3 est le successeur de l'iPad Mini Retina (maintenant appelé iPad mini 2).

61 questions Voir tout

Options

What to do with tape on replacement digitizer?

I’m replacing the front panel on my son’s iPad mini 3. After disassembly and cleaning up all the shards of broken glass, I am ready to reassemble using the replacement part I ordered from ifixit.

I’m at the point of plugging the new digitizer board in, but the board is wrapped with black tape. The original digitizer board was not. So is this just protection for shipping that needs to be removed for installation, or should I leave the tape on the digitizer board?

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

By "black tape" do you mean a peel-off adhesive, because the digitizer board is supposed to be attached to the rear case (see Steps 46-47 in the below guide where the digitizer is removed from the back case), and iFixit typically includes an adhesive pre-installed on the parts for your to "peel-off" for reattachment. Now, if you mean "wrapped" as in wrapped around front and back, then this isn't normal.

Remplacement du panneau frontal de l'iPad Mini 3 LTE

Cette réponse est-elle utile ?

Oui Non
Indice 0

1 commentaire:

I was using the WiFi model guide..... well because I have a WiFi model, but the LTE guide you linked to actually has more detail on it that actually matches what I'm seeing better. Thank for pointing it out.

par

Ajouter un commentaire

Ajouter une réponse

James Alley sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 185