Réparez vos affaires Communauté Boutique

Guides and repair information for coffee and espresso makers from Jura Elektroapparate AG, a Swiss developer and distributor of home appliances.

98 questions Voir tout

Options

Re-assembled Jura Impressa F50 - Loud Noise at end of cycle

I replaced the drainage valve in my Jura F50 machine and it now makes coffee :)

Unfortunately it also make a very loud noise as if something is stuck at the end of the coffee making cycle. Its almost certainly something I have done wrong in re-assemble but everything seems to work (Coffee good, coffee grind where it should be and no obvious leaks etc.) Any ideas on what this might be?

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 2
1 commentaire

The problem actually seems to be worst when a clean is done after switching the machine off. The loud noise goes on for some time and the machine resets rather than turning off (Next attempt to power it off immediately powers it down)

par

Ajouter un commentaire

2 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Réponse la plus utile

Options

Feeling kinda foolish now. All I had to do was let it complete one cycle without the coffee grind bin in place (Tray in but collection bin out). Must have been out of position but now its ok.

Cette réponse est-elle utile ?

Oui Non
Indice 1
Ajouter un commentaire

Options

Exact same problem, also with an F50, and your easy fix worked a treat!

5 years later almost to the day, thank God for internet!

Robert Dunkley, you’re a gem🙏🏻

Cette réponse est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

Ajouter une réponse

Robert Dunkley sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 7

30 derniers jours : 21

Total : 1,257