Aller au contenu principal

The 7th generation Honda Accord

101 questions Voir tout

car starts off slow and good after. code P0962 . replace how?

I have a 2003 honda accord coupe, no leaks in the transmission at all. When I start to drive the car it takes a lot to get going but after if moves just fine. No problem in shifting and the reverse is good too. Is it the pressure control solenoid valve?

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 2
Ajouter un commentaire

1 Réponse

Solution retenue

Dexter Murphy, error code P0962=Pressure Control Solenoid A Control Circuit Low. Had the same happening on my jeep and required me to replace the Solenoid. There is a great flow chart fault finder on here I know it does say civic but the error is the same :-)I also attached an image for the transmission and the solenoid is shown as #4 and sits on the outside of your transmission. Good Luck and I hope you get it done.

Block Image

Cette réponse est-elle utile ?

Indice 2

2 commentaires:

Thanks oldturkey03 for all your help. I get the part in tomorrow. I pray this is it. Have a great day

par

thank you for accepting my answer and I hope that you get your error code resolved with the new part. BTW my jeep had the same error code and would not shift gears and drove horrible, after changing a $40 solenoid inside the tranny, drives like new. So we'll keep our fingers crossed...Good Luck

par

Ajouter un commentaire

Ajouter une réponse

Dexter Murphy sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 9

30 derniers jours : 26

Total : 8,691