Aller au contenu principal

6ème génération de l'Apple iPhone, annoncé le 12 septembre 2012. La réparation de cet appareil est similaire aux précédents modèles et nécessite des tournevis et des outils pour ouvrir et faire levier. Disponible en GSM ou CDMA / 16, 32 ou 64Go / Noir ou Blanc.

2522 questions Voir tout

After replacing battery, touch screen does not work

Hi

I used your iPhone 5 battery replacement kit and seemed to do everything fine during the steps. Now there is no sensitivity on the screen, can’t touch to select top row of icons, can’t swipe to turn off, etc. Just in the top part of the screen. Any ideas what has gone wrong?

Thanks

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

1 Réponse

Solution retenue

"Just in the top part of the screen"?

You could try re-seating it but that might be a bad part

Cette réponse est-elle utile ?

Indice 0

2 commentaires:

Hi, thanks for your suggestion. I tried resetting but still did not fix. Unfortunately the touch screen is even worse now and most of the sensitivity, or ability to touch icons or swipe, has gone from most of the screen. Or I touch an icon on the bottom row to open an app, and it opens an icon on the top row!

par

If you still have it, you could try reconnecting your old screen to see if it still works for touch (assuming you replaced it because it was cracked). If it works ok then you might have gotten a replacement screen and in that case I'd contact the seller to discuss warranty.

There's really only two things it could be - either the screen or the logic board. If you can rule out the screen, then you could probably replace the device for less than it would take to have someone repair the logic board

par

Ajouter un commentaire

Ajouter une réponse

K G sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 68