Aller au contenu principal

The DuraForce PRO is a Verizon rugged smartphone released in October 2016, that is built to be water/dustproof and screen shatterproof. This phone also has a removable battery (note that removal of battery will void the warranty) and many other parts. Model numbers: E6810.

Questions au sujet de 9 Voir tout

How to re-adhear rubber covers to top and bottom of Battery Door.

What adhesives and/or techniques would you use to get the rubber covers of the Kyocera DuraForce Pro’s Battery Door to sit flush and clean looking? I’m not really a cellphone repair guy, so this one has been giving me trouble.

Block Image

While you’d think the rubber nipples that feed into the holes on the battery door would make things easier… They actually seem to make it more difficult to sit entirely flush. Leaving bumps or bubbles, as if the rubber cover wasn’t sized properly.

My best guess would be rubber cement for the adhesive. But I’d need a lot of working time to wiggle the rubber covers into the holes to make it sit flush.

Any suggestions on tools, techniques, or anything else to make this task easier?

Thank you.

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 1
Ajouter un commentaire

1 solution

Although the ambition is admirable, I’ve found that re-gluing them yields a disappointing result. I just bought a new cover on ebay for $3. Cyanoacrylate glue can work, but it won’t come out pretty.

Cette réponse a-t-elle été utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

Justin Krueger sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 2

Total : 182