Aller au contenu principal

Annoncé le 9 septembre 2014, ce dispositif est la première percée d'Apple dans les objets connectés. Les manuels de réparation d'iFixit s'appliquent à l'Apple Watch (acier) et à l'Apple Watch Sport (aluminium).

210 questions Voir tout

Apple Watch Stuck on Logo after Screen and 3D Touch replacement

After successfully replacing a friends Apple Watch screen, I noticed the 3D Touch sensor was broken, and the watch would not turn on past the Apple logo. I ordered a new 3D Touch sensor + adhesive from the site as well, and just installed that, thinking that was the issue. Now I have installed the sensor and the screen all back on (and battery), and the screen is still stuck in the Apple logo. Does anyone have any ideas what might be going on here?! The watch will turn on to the Apple logo, screen appearing to work fine, but it’s stuck there. Before applying the outer adhesive/gasket I want to figure this out. Any ideas? The watch turned on and worked fine prior to changing the screen, it was just terribly cracked. Before doing any of this I tested it and it appeared to work fine.

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 4
Ajouter un commentaire

2 Réponses

Where did you get the replacement screen? Did you order the correct one for your watch?

Cette réponse est-elle utile ?

Indice 0

1 commentaire:

I got it from iFixit as well. And yeah it’s the 38mm original Apple Watch.


Ajouter un commentaire

There seems to be a software issue that affects the original series watch.

I have the same problem. Wont pair, intermittent apple logo that occasionally fades into red & also a red exclamation logo screen.

Never resets or boots. Cannot be detected by iphone to pair.

An Apple Genius tech in London simply rejected any repair as original watch is basically classified as obsolete.

Possibly if us civilians had the right hardware to access the hidden port & the files to debug the OS software/ firmware it would be a fix; but I see nothing on line to suggest anyone has got that far…

Cette réponse est-elle utile ?

Indice 0

2 commentaires:


Did you remove the battery as iv seen apple watches that have half of the battery connector torn which results in this

Hopefully this helps

thanks :)


@matthewkiernan - Nope that's not a software issue its a failing battery!


Ajouter un commentaire

Ajouter une réponse

Chris sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 2

Total : 328