Réparez vos affaires Communauté Boutique

Repair guides and support for computer monitors produced by Samsung.

87 questions Voir tout

Options

Samsung SyncMaster doesn't connect with PC

Hi,

I got this Samsung SyncMaster P2370 from work, because they say it is damaged. The monitor starts perfectly and background lighting works, but the PC doesn’t react if I connect the monitor! The monitor shows an input-box icon and turns off after a while.

It has a DVI input and I use a HDMI-DVI-adapter and a HDMI-cable.

Anybody knows what’s going on or which parts I should check?

Thanks in advance!

Block Image

Block Image

Block Image

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 1
Ajouter un commentaire

2 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Réponse la plus utile

Options

Hi @muellerbua

Suggest you to take out the board with no 6 on it

inspect this board for any cold solder joint, especially on the DVI connector behind.

open the shield below and inspect the board if there is any abnormalities, e.g. burnt component, etc.

Cette réponse est-elle utile ?

Oui Non
Indice 2

2 commentaires:

Thank you! I will check it out!

par

Ajouter un commentaire

Options

Just for the community: The display was completely fine! I just needed a VGA-DVI Adapter.

So apparently a HDMI-DVI-Adapter doesn’t work here

Cette réponse est-elle utile ?

Oui Non
Indice 0

1 commentaire:

I have always used a HDMI-DVI-Adapter with no problem! As the above thread reads, the DVI connector can have a cold solder break from the pressure on the board from the weight of the attached cable.

Now does anyone know if it is safe to reflow that board in the oven?

par

Ajouter un commentaire

Ajouter une réponse

Chris Müller sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 15

Total : 507