Aller au contenu principal

Une caméra d'action 4K produite par Akaso, mise sur le marché en janvier 2017. La caméra comprend un dispositif Wi-Fi et peut être télécommandée à distance.

5 questions Voir tout

How to replace the lcd sreen the akaso ek7000 pro

How do I replace the lcd screen on the Akaso EK7000 Pro?

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 1
Ajouter un commentaire

4 Réponses

Solution retenue

here is a link to someone attempting to open this camera https://www.youtube.com/watch?v=uvUApkjt...

at a rough guess the front screen is glued to the outer rear case and you will need to apply heat to remove it to access the flex cable on the motherboard. Having done a google of “replacement lcd”… I found zero… I’d say it’s probably cheaper to buy a replacement camera .

Cette réponse est-elle utile ?

Indice 4

3 commentaires:

You were right, but I had to take the camera completely apart and push the screen out from the inside. Only the bezel around the LCD was glued. Once loosened it came off easlily.

Thank you very much.

par

you're welcome. good luck

par

i dropped mine and the front screen fell off and I was in a rush because I needed to be somewhere and i just quickly snapped it back on although I snapped it on upside down with some dust on the inside. Why am I so stupid and how can I get into it again without a risk of breaking it or heat?

par

Ajouter un commentaire

I believe this is a clone of the Eken H9

Here's a link to a teardown of the H9

I've watched the other linked YouTube video, and they are almost identical.

The screen is removed from the other side,

teardown of Eken H9

https://youtu.be/a9TffuIpYE0

The bad news is - if it's like the Eken H9

The screen is firmware specific (matched)

ONLY the specific part numbered screen will

Also resolutions are fake

4k video (1080 real)

Anything above 4mp

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

does anyone know how to take an lcd screen off on an og akaso ek7000

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Pretty sure it's similar to the Eken H9R

teardown of Eken H9 (1)

Less lifting of the screen, and more outward pressure on the case, so lever out and then lift

https://youtu.be/a9TffuIpYE0

Cette réponse est-elle utile ?

Indice 0

1 commentaire:

Just be aware too … the drivers for the screen are part of the firmware, so you can't use just any LCD screen (if you are replacing a broke screen)

par

Ajouter un commentaire

Ajouter une réponse

bill-odell sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 11

Total : 992