Aller au contenu principal

Sorti le 25 septembre 2015. Modèle A1687/A1634. La réparation de ce modèle est similaire à celle des versions précédentes et nécessite tournevis et outils pour faire levier. Disponible en GSM et CDMA / 16, 64 ou 128 Go / Argent, Or, Gris sidéral ou Or rosé.

1041 questions Voir tout

Replaced rear camera, and now flash and the rear camera don't work.

Not sure what to do about this. Had the blurry focus issue with rear camera, ordered new one, replaced it. And after putting everything back together, not only does the rear camera not show up, but torch doesn’t work.

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 1

1 commentaire:

Same issue kind of.... My 6s+ was plagued with the shaky tracking issue everyone else has.

I bought a replacement and installed it. Now flash/led does not work and the camera is not recognized by any app. (Black screen). I reopened the phone and reinserted the OEM one… same issue. All connections are tight and everything is replaced as it should be.

I’ve reseated the ribbons 10 times (which each camera, old and new) and restored my phone to factory. No change.

Did I damage the board? I’ve seen a ton of these questions asked but the answers are always “reboot the phone” “reseat the cables”. That’s not the answer here.

What’s my next move?

par

Ajouter un commentaire

1 Réponse

be sure the connector is completely connected on the board, also check for damage on the flex cable for the camera & flash.

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

Jordan Wright sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 41