Rep: 609
5
14
1
Replaced a screen on a 7 today.
During the process, I accidentally broke the small black cable that has the pins that touch the ear speaker on. The rest of the front camera flex is fine, just that section is physically broken.
Now, the phone is going into boot loop.
It’s showing the Apple logo and the home button is responsive, but is just loading over and over.
Thanks in advance.
Sam.
Cette question est-elle utile ?
Rep: 1,8k
4
3
Replace the whole flex. This is a common issue if that flex gets damaged. It happens, because the iPhone will only boot when all of its components work properly. So with the flex being partially broken, it will boot loop until the flex is replaced.
Cette réponse est-elle utile ?
@toreskey Got it, thanks. Have ordered another part so will see.
Any tips on removing the flex carefully and safely? (except going slowly, of course).
I usually heat the front top side of the screen to where its warm to the touch making the adhesive that holds down the pins soft, then I actually take a very small/fine blade like and x-acto knife and get under the flex. Be very careful doing that. I also have used fine point tweezers to get under the flex. Just something small and thin you can get under the flex will work fine.
Thanks, @toreskey! The problem is solved. I had a feeling it would be that as nothing else wasn't working on the device and it was clear that I had broken the ear speaker contact points. Much appreciated!
Hey no worries! Glad I could help!
Dernières 24 heures : 0
7 derniers jours : 0
30 derniers jours : 0
Total : 71
