Aller au contenu principal

Infos et tutoriels pour réparer l'iPhone 8, sorti le 22 septembre 2017, modèles A1863, A1905.

869 questions Voir tout

Black Screen after LCD replacement

I followed the guides. I replaced the LCD screen, moved all parts and installed to new screen. Cables are not broken. The screen after turning on, is black. Not dim in bright light. Just black. I tried with iTunes, comes with error 4005. I put back the old original screen. The problem remains. Now is Xmas and all services are closed. Appreciate for ideas.

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 1
1 commentaire

I took to the service today, I had managed to brake the ID Sensor cable. Now screen works, and with installed graphical home dot on the screen. I am talking to Apple, if they allow this home key unit to be replaced. It can be done, but cost maybe half of the phone cost. Evaluation continues. Will see. Thank you anyways for your good advise.

par

Ajouter un commentaire

2 Réponses

Solution retenue

You should try seeing if any connections are loose and or broken. There could be a small piece in the connector broken when you replaced it.

Cette réponse est-elle utile ?

Indice 1
Ajouter un commentaire
Réponse la plus utile

It sounds like you’ve damaged the LCD chip when repairing the screen, the fact that you can’t see the display even in bright light such as a flashlight eradicates the backlight filter out of the problem. I’d say you’ve accidentally damaged the LCD chip on the logic board when replacing the screen.

Also, check all connections from the flex cable to the LCD are tight.

Unfortunately, you’d have to replace the logic board to replace the LCD Chip.

Hope I could solve your problem.

Cette réponse est-elle utile ?

Indice 3
Ajouter un commentaire

Ajouter une réponse

Mikael Keinonen sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 6

30 derniers jours : 8

Total : 913