Aller au contenu principal

Sorti le 16 septembre 2016. Modèle 1660, 1778. Disponible en GSM ou CDMA / 32, 128 ou 256 Go / Or rosé, or, argent, noir et noir de jais.

2261 questions Voir tout

My iPhone fell of a shelf and bent

Block Image

Hi, I have an iphone 7 that fell of a shelf, the result is that the screen is broken but also the back housing of the phone is bent on the side of the lock button, is there any risk of something not working on the inside of the phone? The phone turns on but the touch screen is not working I just see some parts on the home screen.

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

1 Réponse

Solution retenue

Obviously, the screen will need to be replaced. As for the housing, my concern would be if it is applying any pressure against the logic board.

You can always try and straighten out the housing but to do this properly, you have to remove the innards so that nothing gets damaged or flexed while you bend the housing into shape. The aluminum is soft so be wary of it breaking. One alternative is to get a housing from a used device or order an aftermarket housing (they are not all good though)

Cette réponse est-elle utile ?

Indice 3

2 commentaires:

And what can I use to straighten it back to it’s original shape?

par

@diy_ You can buy a soft rubber hammer, use a flat stiff surface to compare flatness and use lots of care. However iPhone case resistance to bending won't be as good as before. Flexing of the board might also lead to issues with time, but crossing fingers is all one can do to prevent that if microdamages are there already. Judging by the picture you enclosed there's quite a bit of bending unfortunately.

par

Ajouter un commentaire

Ajouter une réponse

fede sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 11

Total : 969