Réparez vos affaires Communauté Boutique

Sorti le 25 septembre 2015. Modèle A1688/A1633. La réparation de ce modèle est similaire à celle des versions précédentes et nécessite tournevis et outils pour faire levier. Disponible en GSM et CDMA / 16, 64 ou 128 Go / Argent, Or, Gris sidéral ou Or rosé.

2687 questions Voir tout

Options

How to find issue of slow charging and fast discharging?

Hello! I just bought used, damaged iPhone 6s.

First I replaced battery for branded Apple - and phone wake up.

Next, I replaced flex cable with charging port and jack, because jack was not working - now it works.

Now everything is good except… very slow charging, and fast discharging. I’m using good quality Mcdodo cable, tried with every possible chargers and also other cables.

Can you tell me what could be faulty? Best advice would be, what should I measure to localize the issue. Any iPhone schematics source? Can it be just Tristar power management chip?

Please help :)

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
1 commentaire

You probably bought a used battery that isn’t good anymore.

par

Ajouter un commentaire

3 Réponses

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

If you feel confident that your replacement parts are good quality and fully functional, then the next step is to look at the charging circuit on the logic board. That consists of the Tristar & Tigris IC and the supporting components. The issue here is that you have a phone with unknown history. That’s good and bad I guess. It is likely that the previous owner used a low quality charger and damaged the Tristar IC.

We can’t share schematics here but they are easily findable, *cough, gsm forum, cough*. Also, Blackfish, of ZXW fame is now free without a dongle so you can access the schematics that way. As for boardview software, there is the new Phoneboard which is free as well.

Cette réponse est-elle utile ?

Oui Non
Indice 2

4 commentaires:

@refectio Phoneboard is $10 a month now ;-{

par

That's only for the Mac version. The PC version is still "free".

par

Minho - thank you for the nice tips :)

Now, I just checked voltage on battery connector and it's 0.63V…….

par

That's low, you should see around 3 - 3.7 volts

par

Ajouter un commentaire

Options

I would take the time to look through Jessa’s YouTube Vids on iPad Rehab.

I suspect you might have some corrosion damage or a bad cap as this sounds like a sort condition.

Cette réponse est-elle utile ?

Oui Non
Indice 0

1 commentaire:

I spoke with previous (first) owner, and phone was working quite properly, but some day it stops charging, and he forget about the phone for some time. I don't know it's about the corrosion, but I will take a look :)

par

Ajouter un commentaire

Options

Have you made sure the battery is to its full functioning capacity??? To this go to settings on your phone and click on “battery” once there click on “battery health” your battery should read like this (look at the picture) if it says anything else you more than likely bought a faulty battery and may need a new one. Hope this helps.

Block Image

Cette réponse est-elle utile ?

Oui Non
Indice 0

1 commentaire:

Yesssss, batery is healthy, I checked it with coconutBattery also.

par

Ajouter un commentaire

Ajouter une réponse

Wiktor Francikowski sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 336