Aller au contenu principal

Lancé le 4 novembre 2017. Modèles A1868, A 1901. Disponible avec GSM ou CDMA /  64 ou 256 Go / argent et gris sidéral. (Se prononce "iPhone 10".)

1196 questions Voir tout

iPhone X no power.

Hello everyone.

I have am iphone X qualcomm that would not power.

When i hook up only the top layer of the pcb to dcps, the top layer draws current before prompt to boot. But i tested with a DMM and found no shorts on PP_VDD_MAIN and PP_VDD_BOOST.

now i wonder what other lines could draw current before prompt to boot.

Any help is appreciated.

THANKS.

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 0
1 commentaire

Are you sure your power squid is good?

par

Ajouter un commentaire

2 Réponses

Solution retenue

How much current? It’s not like there is some main switch on the logic board that cuts all the current to the components.

Take a look at the schematic and the moment a battery or a USB power source is connected, quite a few components receive VDD_MAIN. There is a line called PP1V8_ALWAYS and as the name suggests…it is always on.

So if the board is still dead, focus on all of the subsystems powered by the PMIC to see if there are any shorts or related issues. They may be the cause of your problem.

Cette réponse est-elle utile ?

Indice 2
Ajouter un commentaire

Use this as a reference https://www.youtube.com/watch?v=nuZz_D1u...

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

Abdulmajid Mubarak sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 7

Total : 292