Aller au contenu principal

Sorti le 25 septembre 2015. Modèle A1688/A1633. La réparation de ce modèle est similaire à celle des versions précédentes et nécessite tournevis et outils pour faire levier. Disponible en GSM et CDMA / 16, 64 ou 128 Go / Argent, Or, Gris sidéral ou Or rosé.

Questions au sujet de 2028 Voir tout

iPhone wont charge with original cable and its discharging very fast

So I bought iPhone which came with original battery that said it had 80% health but I could use it maximum 30 min and replaced it with replacement battery but life on this battery isnt very good either. If I leave disconnected from charger at night in the morning its dead so even when its not doing anything its discharging. When the battery drops below 25% its start to lag and its unusable actually and sometimes this percentage at when its starts to lag varys, also now it lags when it has 60%. Does anybody know what could it be?

Une réponse ! View the answer J'ai le même problème

Cette question est-elle utile ?

Score 0
Ajouter un commentaire

Batteries pour ordinateurs portables

Une réparation facile pour un gain en puissance max.

Acheter maintenant

Batteries pour ordinateurs portables

Une réparation facile pour un gain en puissance max.

Acheter maintenant

2 réponses

Solution retenue

Sounds like charging chip if it wont charge with original cable (make sure that cable works on another iPhone) but the lagging sounds like bad quality batteries.

Cette réponse est utile ?

Score 3

Commentaires:

Do You maybe know the name of that chip?

par

It would be called U2 Tristar charging IC

par

Thank You very much! I found that some people replace U4, do You maybe know what he is?

par

Ajouter un commentaire

Tristar failure is a really good candidate for this problem, or you may have some corrosion on the logic board that is causing a partial short resulting in a low level current leak. Either way—these are microsoldering problems and it is time for a trip to your friendly local microsoldering/board repair shop.

Cette réponse est utile ?

Score 2

Commentaires:

Well I was thinking of replacing it myself because I do know to solder with hot air gun so maybe I will give it a try on broken phone first then on my, thank You!

par

Ajouter un commentaire

Ajoutez une réponse

Electro Discover sera éternellement reconnaissant.
Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 4

Total : 61