dropped phone in water. Everything works good except no cell service.

The proper way treat a wet phone is to do the following:

• Open your phone and remove the logic board (check out these guides)
• Inspect the logic board, especially around the connectors and look for corrosion.
• Inspect both sides of the board. Unfortunately, some of the board is covered in shields. That's usually where the damage is occurring.
• Put your board in a container with >90% isopropyl alcohol and let it sit for a while.
• Use a soft brush, like a toothbrush and lightly brush away any corrosion you see.
• Rinse in alcohol and repeat.
• Let it air dry for a day.
• Re-assemble and hope for the best.

You should also replace the battery if it has swollen. Resist the temptation to pop it to let the gas out. A compromised Li-ion battery is a fire hazard.

A professional repair shop that does water damage repair may be able to recover your data because they have access to pro-level ultrasonic baths and specialized cleaners as well as the skills to troubleshoot your board. Many shops have a no data/no fee policy so you don't have to spend money to find out if the data is recoverable or not.