Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Repair and disassembly guides for Kenmore Microwaves.

Questions au sujet de 168 Voir tout

Microwave shuts off intermittently, already replaced door switch assem

I have a model 401.80082700 serial 725MM00044. Intermittent problem. Microwave goes through heating cycle and then totally powers off…no display, no light, no power. After 15-30 seconds the display comes on and instructs to press clock and reset time of day. After doing so the microwave is fully functional and may operate several times before powering off again. Occasionally the display appears fainter than normal, esp the center of display. I have replaced the door switch assembly but after several days the intermittent problem has returned. What do you think? TY

Répondu ! View the answer J'ai le même problème

Cette question est-elle utile ?

Score 1

Commentaires:

After much delay and frustration I ordered and replaced the control board…..works great…..thanks for your recommendation!

par

Ajouter un commentaire

Manta Precision Bit Set

112 embouts pour toute réparation.

Upgrade Your Toolbox

Manta Precision Bit Set

Upgrade Your Toolbox

2 solutions

Solution retenue

Sounds like the problem is the control board, not the door assembly. Try replacing the main controller circuit.

Good luck!

Cette réponse a-t-elle été utile ?

Score 1
Ajouter un commentaire
Réponse la plus utile

There are two parts to that door switch, here they are on your model along with how to test them:

https://www.repairclinic.com/RepairHelp/...

Cette réponse a-t-elle été utile ?

Score 2
Ajouter un commentaire

Ajouter une réponse

Ken Thome sera éternellement reconnaissant.
Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 6

Total : 111