Aller au contenu principal

Avec la version de mars 2015 du MacBook Air 13", Apple offre des processeurs bicœurs i5 et i7 de cinquième génération et par conséquent une batterie avec une meilleure performance et durée de vie.

623 questions Voir tout

Pulled lcd connector pad

Block Image

Block Image

Block Image

Hey,

i had had a water damage Macbook come in for repair. I took the LCD Connector off because I noticed it was burnt on the right side of the logic board.

anyways, I pulled the connector off and noticed a pad was gone. I looked at the trace for it and it looks like the last pin is on the same circuit. Can some chime in to tell me if I could solder the pin over to that one? And possibly provide a schematic of this connector so I know what it does

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

1 Réponse

Solution retenue

Actually, it looks like the pad is not connected to anything, at least not on the surface. Perhaps that’s just because the picture isn’t zoomed in enough.

As for the schematic, you have to provide the logic board model number otherwise we’re just guessing.

EDIT

Block Image

Cette réponse est-elle utile ?

Indice 2

5 commentaires:

Sorry I desoldered the connector and seen the pad was pulled. I’m curious to know if that pad is ground or not needed for anything

par

This logic board is for MacBook Air 13” early 2015

par

I meant to say "pad" and not "connector" (see edit above).

What is the logic board model number (820-XXXX-X), you will see it silk screened on the pcb.

par

I updated my question with the board pictures . I couldn’t see 820 anywhere on the board

par

It's pin 2, NC as I suspected.

par

Ajouter un commentaire

Ajouter une réponse

Daniel Ringuette sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 81