Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Sorti 22 septembre 2017. Modèles A1864, A1897. Disponible en version GSM ou CDMA / 64 ou 356 Go / Or, argent et gris sidéral.

Questions au sujet de 491 Voir tout

NFC quit working after charge port replacement

I work for a local phone repair shop. Me devices don’t come back with issues after a repair. However, after changing my charge port, my nfc is no longer working. No Apple Pay and I can read my wife’s Freestyle constant glucose monitoring device. I have checked all connection an found nothing wrong. I have also done a factory restart to no avail. Any suggestions?

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 3
Ajouter un commentaire

1 solution

Réponse la plus utile

Pay close attention when removing the logic board on the 8+. The NFC portion of the logic board is located on the top right hand corner. The stand-off screw, just below the the one holding down the camera shield, also has a black plastic ring that it goes through. When you replace the logic board make sure that ring is on top of the logic board and not underneath it. If not paying close attention you will miss this. That ring is part of a short connector that wraps around the cameras to the top right hand corner of the frame. The NFC uses the frame as an antenna. Apple Pay will not work if this step is missed, nor will anything using NFC.

Cette réponse a-t-elle été utile ?

Indice 4

Commentaires:

This worked! Thank you so much for sharing your wisdom. God bless you (:

par

very helpful! Thanks!

par

Ajouter un commentaire

Ajouter une réponse

Darin Barfield sera éternellement reconnaissant.
Afficher les statistiques:

Dernières 24 heures : 3

7 derniers jours : 11

30 derniers jours : 21

Total : 450