Réparez vos affaires Communauté Boutique

Variante avec option LTE de la cinquième génération d'iPad, lancée en mars 2017. Disponible avec un stockage de 32 ou 128 Go, un écran Retina de 9,7" et un processeur A9 64 bits.

46 questions Voir tout

Options

What to do with the digitizer flap when re-assembling

Block Image

Greetings,

My question is regarding step 31 of the iFixit front panel replacement:

iPad 5 LTE Front Panel Assembly Replacement

And it appears that another person had a similar question at this point, with their question left unanswered.

Here’s my question:

The “hinge” part of the digitizer cables (the flap portion) looks like it is supposed to tuck into the crevice between the LCD panel and the side of the aluminum body - my replacement (from iFixit) has sticky contact on the upper side of this flap, making me think that its supposed to adhere to the side of the LCD panel, but the instructions do not make this clear - is my assumption correct?

I’ve attached a picture of the area in question.

Thank you for any response to my query.

Regards,

DLC

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

This is how the flex should be positioned prior to final assembly.

Block Image

Some suppliers fold it over and adhere it to the digitizer beforehand while others let you do it yourself. It’s hard to say from your picture as it is not clear enough. If you have to adhere it yourself, keep in mind that the flex (the portion with the connectors) has to do an inside-out for it to be positioned properly.

Also, check out this answer (After doing my repairs (battery and screen) I have problems) I provided earlier for some general “best practices” on iPad re-assembly.

Cette réponse est-elle utile ?

Oui Non
Indice 4

1 commentaire:

Hello Minho,

Thanks (again) for such invaluable information - I wound up adhering the flap to the underside of the digitizer-i noticed this was done on the original OEM front panel and I simply emulated the procedure - it only stayed completely in place once the iPad was completely assembled.

Thanks again,

DLC

par

Ajouter un commentaire

Ajouter une réponse

dlcatftwin sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 2

Total : 105