Aller au contenu principal

Sorti le 25 septembre 2015. Modèle A1688/A1633. La réparation de ce modèle est similaire à celle des versions précédentes et nécessite tournevis et outils pour faire levier. Disponible en GSM et CDMA / 16, 64 ou 128 Go / Argent, Or, Gris sidéral ou Or rosé.

Questions au sujet de 2024 Voir tout

iPhone 6s Won't charge when turned on

Hi,

This iPhone 6s does not detect the charger and does not charge, i tried other cables and adapters (i’m using the official lightning cable and adapter), and it detects if i plug it to the computer but does not work, and if i turn off the phone, it charges .

Répondez à cette question J'ai le même problème

Cette question est-elle utile ?

Score 0
Ajouter un commentaire

Batteries pour ordinateurs portables

Batteries pour toutes les grandes marques d'ordinateurs portables. Qualité assurée par notre garantie.

Acheter maintenant

Batteries pour ordinateurs portables

Batteries pour toutes les grandes marques d'ordinateurs portables. Qualité assurée par notre garantie.

Acheter maintenant

2 réponses

Réponse la plus utile

I suspect you have a Tristar issue but follow the recommendations below to rule out other, easier problems first.

When troubleshooting charging issues, I would do the following (in order):

  1. Always try another Lightning cable and charger, preferably Apple original or MFi certified units.
  2. The Lightning cable 8-pin connector should be sitting flush with the housing and completely inserted. If it is not, there could be lint/dust/debris inside the port impeding a proper connection. You can clean it out with a toothpick, fine point tweezers or a dental pick. Just be careful not to damage the pins inside the Lightning Port.
  3. Change the battery. The battery is the weakest link in the entire phone and certainly for charger related issues. It is also the easiest thing to replace. Use a battery utility, such as coconutBattery (for Mac) or 3uTools (for Windows) to test the battery prior to removal. Anything less than 70% of design capacity will require replacement.
  4. If the battery is in good condition, you can use a USB Ammeter to determine if the phone is really drawing current when it says it's charging. If it isn't drawing current, then I would change the Lightning/Charge Port.
  5. If a new battery and charge port still don't resolve the issue, then you either have faulty replacement parts (possible) or a logic board issue. There is an IC (commonly referred to as Tristar) responsible for communicating with the charging device and uncertified chargers can damage it. Unplug the battery and connect a known-good (preferably Apple original or MFi) charger to the phone. A properly working phone will show an Apple logo and boot loop. If the Tristar IC is bad then the phone will not do anything.

Cette réponse est utile ?

Score 1
Ajouter un commentaire

Have you tried a new chargin port?

Block Image

If yes and didn’t work you should start worry about your motherboard.

Charging ic maybe.

Cette réponse est utile ?

Score 1
Ajouter un commentaire

Ajoutez une réponse

Nuno Martins sera éternellement reconnaissant.
Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 17