Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Released in 2015, the Samsung POWERbot VR9000, model number SR20H9050U, is a robot vacuum with automatic charging and point clean functionalities.

Questions au sujet de 8 Voir tout

How can I reset the Samsung Powerbot VR9000 computer?

first I had a C06 error message, and my docking station green light was blinking and not charging. After cleaning all sensors and the brush very well, I turned the unit off and on as instructions stated. Now I either get a C01 error message or it just docks itself and acts like its charging but never really does. Is there a way to reset the computer in the unit?

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Score 0

Commentaires:

Hi friends...

i have 3 robots - 2x rv 9000 .1 x rv 7040 ...

both have died, now i have one vr9000 in operation. What I do is a beautiful trick. I'm going to load it to charge, When I load it I get it out of the loading station. But friends make fun of all the robots having a serious problem with the motherboard, and the battery charging system ... It's a rubbish ...

par

Ajouter un commentaire

Kits pour Nintendo Switch

A quick fix to get back in the game

Shop Switch Kits

Kits pour Nintendo Switch

A quick fix to get back in the game

Shop Switch Kits

1 solution

Follow these steps:

  1. Hold down the Reset button on the back of the device using a safety pin or similar tool for approximately 10 seconds
  2. Release the Reset button when the LED on the front goes dark
  3. Wait for the LED to flash red and green, indicating it is ready to connect again

 

Alternatively, you can also factory reset the Samsung Connect Home from the SmartThings app, but the Connect Home must be online. An offline or disconnected Connect Home must be physically reset.

  1. To view the Hub's Location, select Menu () and touch the dropdown arrow to select the Location name.
  2. Select Menu () and then touch Devices.
  3. Select the Wi-Fi Hub device.
  4. Touch the Wi-Fi Hub image
  5. Touch Factory Reset
  6. The LED will turn off and the Hub will reboot. When the LED blinks red and green, the Hub is ready to connect again.

Cette réponse a-t-elle été utile ?

Score 0
Ajouter un commentaire

Ajouter une réponse

Andrea Lafrance sera éternellement reconnaissant.
Afficher les statistiques:

Dernières 24 heures : 7

7 derniers jours : 33

30 derniers jours : 87

Total : 230