I have a screen that needs replacing so purchased a replacement screen but, discovered the controller board connections are different. However can I swap my controller from the LM270WQ1 SD E3 with the controller in the working lcd LM270WQ1 SD A2
thanks everyone in advanced
Cette question est-elle utile ?
Rep: 479,1k
35
329
971
Are you sure the T-CON board is good? Do you have a cracked LCD screen or is there another issue? You may find the problem was within the T-CON board not the LCD so you aren’t really fixing things.
I’ve never tried swapping the boards between different series so I’m not sure if it will even work. Have you tried talking to the seller of the wrong display or have any way of getting the correct one? I would hate to see you take such a risk when we just don’t know enough.
Cette réponse est-elle utile ?
Hi Dan thanks for replying,
The original LCD has a cracked screen (long story) I have tried to contact the seller but have had no reply.
I know, well have found that the controller board can be swapped on other model screens, just wondered if the boards are changeable. The screen is identical in every way apart from the connectors on the board?
Thank you tho for taking your time to reply
Mentes :)
Dernières 24 heures : 0
7 derniers jours : 0
30 derniers jours : 4
Total : 275
